On Wednesday, ISRO will launch Cartosat-3, and 13 other foreign satellites, aboard a PSLV (Polar Satellite Launch Vehicle). This will be ISRO’s fifth launch this year and the first since the July 22 launch of the Chandrayaan-2 Moon mission.
The main purpose of the mission is to place the 1,625-kg Cartosat-3 satellite, the third generation of Earth-observation remote sensing satellites that ISRO has been launching and using 1988. These satellites provide high-resolution imagery of the Earth that are used for applications like 3-D mapping, disaster management, agriculture and water management, recording of changes in land use, and urban and rural infrastructure planning, and even border surveillance.
The PSLV-C47 rocket is also carrying 13 commercial nano-satellites from the US. Twelve of them are Flock-4P satellites, also Earth-observation satellites, from the private company Planet, which has sent several such satellites on PSLV rockets earlier. In fact, it was an earlier version of these same Flock satellites that, in February 2017, had helped ISRO launch a world record 104 satellites at one go. Of the 104 satellites on board PSLV-C37, 88 were Flocks. Those Flocks were called doves, and the current bunch is known as super-doves.
Various Earth observation satellites
The main payload in Wednesday’s launch would be the next-generation Cartosat satellite. The Earth-observation satellites also include the Resourcesat and RISAT series, the Oceansat series and many more. These satellites now focus on generating theme-based user-friendly data that are in great demand. The Resourcesat and RISAT series of satellites, for example, provide imageries and data that are needed for land and water resources applications. The Oceansat series and the SARAL satellite, meanwhile, produce data on the oceans, while satellites like INSAT 3D, INSAT-VRR or Megha Tropiques study the atmosphere.
Cartosat-3 has been developed as an improvement over the Cartosat-1 and Cartosat-2 series satellites, though ISRO has not yet revealed the full specifications of this satellite.
Cartosat-1, launched in May 2005, was the first Indian remote sensing satellite capable of taking three-dimensional images. With a resolution of 2.5 metres, which meant it could identify a car on the ground from space, Cartosat-1 helped in creating new digital maps of over 150 towns and cities in the country at a scale of 1:10,000. Earlier maps were of a scale of 1:50,000 or even lower. Data from this satellite were also used to a do an inundation vulnerability assessment of the Indian coastline in the event of a tsunami or a major cyclone, and even for estimating the status of irrigation potential created by the large number of projects under the Accelerated Irrigation Benefit Programme.
The first of the Cartosat-2 series was launched in 2007 and these have been substantially advanced versions of Cartosat-1. Seven of them are in orbit, each with the capability of taking images of resolution better than 1 metre. The last three Cartosat-2 series satellites are also placed in a lower orbit — 505 km from the Earth’s surface compared to the 640 km earlier — thereby increasing their resolution further.
ISRO has not revealed the quality of the camera on Cartosat-3 or the resolution of the images it would be able to take. But it is likely to have the capability to take images with resolution better than 0.25 metres.
Wednesday’s mission will fly on a four-stage PSLV rocket that has been the most consistent of ISRO’s launch vehicles. This would be the PSLV’s 49th flight. All but two of them have been successful. Apart from Chandrayaan-2, which flew on a GSLV rocket, the other three launches this year have all used PSLV variants.
Source: The Indian Express
Relevant for GS Prelims & Paper III; Science & Technology